| Weight | 0.5 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Sentry – 12V Light Receiver Transmitter Incl 1 x 4 Button Tx (433.92)
- Sentry – 12V Light Receiver Tansmitter Incl 1 x 4 Button Tx (433.92)
R 695.00
10 in stock (can be backordered)
Reviews & More
| Weight | 0.5 kg |
|---|
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Related Products
The SENTRY Learning 4 Button 403MHz Radio Frequency Remote Transmitter is equipped with an internal receiver that has the capability of “learning” or cloning another transmitter’s code when the two transmitters are within proximity of one another and the “learning” method is executed as explained in the product leaflet. This embedded technology means that the user will no longer need to adjust DIP switches on the PCB, cloning of remotes is done by simple button-press sequences and is confirmed to be successfully learned into memory by LED flashing on the transmitter that is receiving the copied code. The method of “learning” the code of one transmitter into another transmitter is simple and takes seconds to accomplish and the learning range of transmitters are intuitive and user-friendly. The Learning 4 Button facilitates the cloning of most of SENTRY’s legacy code protocols such as Binary, Inverted-Trinary, and SMART.
- Power Source: Internal 12V Battery (Type 23A)
- Frequency: 403.55MHz
- Transmission power: 350mW
- Current consumption: 9mA active
- Physical Size: 65 x 32 x 14mm
- Weight: 30g
- Storage Temp: -10 C to +55 C
- Operating Temp: 0 C to 40 C
- Operating Humidity:
Sentry 1 Button Remote Transmitter – 403MHz
The SENTRY Fixed-code Binary 1 Button 403MHz Radio Frequency Transmitter is a standard DIP-switch type remote control that facilitates up to 4096 unique codes in the binary code protocol. This product is also equipped with a “split-code” mode of operation, which enables the user to assign multiple devices to the same transmitter. This is useful in applications which involve townhouse complexes where a common code may be set for the gate, while still allowing the user to have user-unique buttons that only work with their specific devices in their specific unit within the complex.
- This is a warning system for gate force open
- or left open too long by mistake.
- Kit consist of:
- 1x Sherlo Gate Alarm TX – GA131
- 1x Sherlo RX1 150m – SW72-2
- 1x Roller Shutter Door N/C Contact – MC26
- OR
- 1x Wide Gap N/C Door Contact – MC31
- Encryption: Code-Hopping
- Range: 100m (Open air)
- Frequency: 403MHz / 433MHz
- Voltage Range: 3VDC or 12VDC
- Current draw: +/- 1uA 10%
- Gross Weight: 210grams
- Operating Temp: -7 C to 65 C
- Dimensions(lxbxh): 124 x 80 x 30 mm
- Transmission Frequency: 433.92MHz
- Modulation Format: ASK
- Protocol: Code Hopping
- Power Source:16V AC or DC200 – 250V AC 50 – 60Hz 1.5VA
- Relay Contacts:5A @ 240V AC
- Dimensions: 90mm x 87mmx 31mm
- Mass:< 373g
- Operating Temperature Range:-30 C to +55 C
- Current Consumption: (test supply 13.8VDC) 10mA (idle) 40mA (RELAY 1 a)
Reviews
There are no reviews yet.